Knowledge Management System Of Guangzhou Institute of Energy Conversion, CAS
生物油气流床气化热力学模拟研究 | |
汪丛伟; 周肇秋; 阴秀丽; 吴创之 | |
2013 | |
Source Publication | 太阳能学报 |
ISSN | 0254-0096 |
Volume | 34Issue:10Pages:1835 |
Abstract | 基于吉布斯自由能最小化理论,采用ASPEN PLUS软件建立生物油气流床气化模型,分析氧/空气当量系数(ER)、反应压力、汽碳比(S/C)以及气化剂预热温度对气化过程的影响。研究结果表明,生物油气流床氧气气化和空气气化合适的ER分别宜选在0.36及0.49;气化压力为2~4MPa;水蒸气碳比选取0.4比较适合;空气和水蒸气预热温度,分别宜选在1000?1200°C及300°C。此外,生物油重质组分具有与生物油接近的冷煤气效率、燃气热值及有效气产率,因此有很大的利用价值。 |
Language | 英语 |
Document Type | 期刊论文 |
Identifier | http://ir.giec.ac.cn/handle/344007/19091 |
Collection | 中国科学院广州能源研究所 |
Affiliation | 中国科学院广州能源研究所 |
First Author Affilication | GuangZhou Institute of Energy Conversion,Chinese Academy of Sciences |
Recommended Citation GB/T 7714 | 汪丛伟,周肇秋,阴秀丽,等. 生物油气流床气化热力学模拟研究[J]. 太阳能学报,2013,34(10):1835. |
APA | 汪丛伟,周肇秋,阴秀丽,&吴创之.(2013).生物油气流床气化热力学模拟研究.太阳能学报,34(10),1835. |
MLA | 汪丛伟,et al."生物油气流床气化热力学模拟研究".太阳能学报 34.10(2013):1835. |
Files in This Item: | There are no files associated with this item. |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment