GIEC OpenIR  > 中国科学院广州能源研究所
圆柱形锂离子电池模组微通道液冷热模型
其他题名Thermal modeling of cylindrical lithium-ion battery module with micro-channel liquid cooling
赵春荣1,2; 曹文炅1; 董缇1,2; 蒋方明1
2017-08
发表期刊化工学报
ISSN0438-1157
卷号68期号:8页码:3232-3241
摘要针对电动汽车电堆的热管理系统,建立了包含71节18650型锂离子电池的电池模组的微通道液冷热模型。该模型集总处理单电池热过程、电池生热基于实测结果,模型还特别考虑了电池间导热。基于该模型,模拟研究了放电倍率、冷却液入口流速、电池间接触面积以及电池与水冷管外壁接触面积对电池模组热行为的影响。模拟结果证实了该微通道液冷方案对动力电池模组热管理的有效性,并且发现:放电倍率的增加会使电池模组内单电池温度增加、模组内温度一致性变差;增大冷却液流量可以显著降低电池模组的温度,并改善其温度一致性;增大电池间接触面积可略微提升电池模组温度一致性,但对控制其最高温度作用有限;增大电池与液冷管外壁接触面积可显著降低电池模组内电池的最高温度,但会使其温度一致性变差。
其他摘要Considering the micro-channel liquid cooling thermal management system (TMS) of EV battery packs, a thermal model was established for a battery module consisting of 71 sections 18650 lithium-ion batteries. In this model, the thermal-lumped treatment was implemented for each single battery and the heat generation of a single battery was determined based on experimental measurements. In particular, heat conduction between neighboring batteries was considered. The battery module's thermal behavior, and investigated effects of the discharge C-rate, the liquid flow rate, the heat exchange area between neighboring batteries, and the interfacing area of the battery and the shell of micro-channel were numerically studied relying on the developed model. The simulated results corroborated the effectiveness of the micro-channel cooling system. It was found that: 1) increasing the discharge C-rate led to higher temperature and worsened the temperature uniformity in the battery module; 2) increasing the liquid flow rate can significantly lower the maximum temperature and improve the temperature uniformity in the battery module; 3) increasing the exchange area between neighboring batteries slightly improved the temperature uniformity in the battery module, but only had limited effect at lowering the maximum temperature in the module; 4) increasing the interfacing area of the battery and the shell of micro-channel can significantly lower the maximum temperature in the battery module, but worsen the temperature uniformity in the module.
关键词锂离子电池 热模型 微通道 计算机模拟 传热 lithium-ion battery thermal model microchannels computer simulation heat transfer
DOI10.11949/j.issn.0438-1157.20170278
语种中文
引用统计
文献类型期刊论文
条目标识符http://ir.giec.ac.cn/handle/344007/16717
专题中国科学院广州能源研究所
通讯作者蒋方明
作者单位1.广东省新能源和可再生能源研究开发与应用重点实验室,中国科学院可再生能源重点实验室,中国科学院广州能源研究所先进能源系统研究室,广东广州510640;
2.中国科学院大学,北京100049
第一作者单位中国科学院广州能源研究所
推荐引用方式
GB/T 7714
赵春荣,曹文炅,董缇,等. 圆柱形锂离子电池模组微通道液冷热模型[J]. 化工学报,2017,68(8):3232-3241.
APA 赵春荣,曹文炅,董缇,&蒋方明.(2017).圆柱形锂离子电池模组微通道液冷热模型.化工学报,68(8),3232-3241.
MLA 赵春荣,et al."圆柱形锂离子电池模组微通道液冷热模型".化工学报 68.8(2017):3232-3241.
条目包含的文件
文件名称/大小 文献类型 版本类型 开放类型 使用许可
圆柱形锂离子电池模组微通道液冷热模型.p(1061KB)期刊论文出版稿限制开放CC BY-NC-SA请求全文
个性服务
推荐该条目
保存到收藏夹
查看访问统计
导出为Endnote文件
谷歌学术
谷歌学术中相似的文章
[赵春荣]的文章
[曹文炅]的文章
[董缇]的文章
百度学术
百度学术中相似的文章
[赵春荣]的文章
[曹文炅]的文章
[董缇]的文章
必应学术
必应学术中相似的文章
[赵春荣]的文章
[曹文炅]的文章
[董缇]的文章
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。