Knowledge Management System Of Guangzhou Institute of Energy Conversion, CAS
Gas Hydrate Formation Process for Capture of Carbon Dioxide from Fuel Gas Mixture | |
Li, Xiao-Sen1,2![]() ![]() ![]() | |
2010-11-17 | |
Source Publication | INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
![]() |
ISSN | 0888-5885 |
Volume | 49Issue:22Pages:11614-11619 |
Contribution Rank | [Li, Xiao-Sen; Xia, Zhi-Ming; Chen, Zhao-Yang; Yan, Ke-Feng; Li, Gang; Wu, Hui-Jie] Chinese Acad Sci, Guangzhou Inst Energy Convers, Key Lab Renewable Energy & Gas Hydrate, Guangzhou 510640, Peoples R China; [Li, Xiao-Sen; Xia, Zhi-Ming; Chen, Zhao-Yang; Yan, Ke-Feng; Li, Gang; Wu, Hui-Jie] Chinese Acad Sci, Guangzhou Ctr Gas Hydrate Res, Guangzhou 510640, Peoples R China; [Xia, Zhi-Ming; Li, Gang] Chinese Acad Sci, Grad Univ, Beijing 100083, Peoples R China |
Corresponding Author | lixs@ms.giec.ac.cn |
Abstract | To determine the suitable operating conditions for the hydrate-based CO(2) separation process from a fuel gas mixture, the hydrate nucleation and growth kinetics of the simulated fuel gas (39.2 mol % CO(2)/H(2) gas mixture) in the presence of tetra-n-butyl ammonium bromide (TBAB) are investigated. The experiments were conducted at the TBAB concentration range of 0.14-1.00 mol %, the temperature range of 275.15-282.45 K, the driving force range of 1.00-4.50 MPa, the gas/liquid phase ratio range of 0.86-6.47, and the hydrate growth time of 15-120 min. It is found that the addition of TBAB not only shortens the induction time and accelerates the hydrate growth rate, but also enhances CO(2) encaged into the hydrate. However, the number of total moles of gas consumed and the number of moles of CO(2) transferred into the hydrate slurry phase decrease with the increase of the TBAB concentration when the TBAB concentration is above 0.29 mol %. The induction time reduces, and the number of moles of gas consumed, the hydrate formation rate, and the number of moles of CO(2) encaged into hydrate phase increase with the increase of the driving force. However, when the driving force is more than 2.5 MPa, H(2) prefers to go into the hydrate phase with the increase of the driving force, as compared to CO(2). In addition, the temperature has little effect on the hydrate formation process. |
Subtype | Article |
Other Abstract | To determine the suitable operating conditions for the hydrate-based CO(2) separation process from a fuel gas mixture, the hydrate nucleation and growth kinetics of the simulated fuel gas (39.2 mol % CO(2)/H(2) gas mixture) in the presence of tetra-n-butyl ammonium bromide (TBAB) are investigated. The experiments were conducted at the TBAB concentration range of 0.14-1.00 mol %, the temperature range of 275.15-282.45 K, the driving force range of 1.00-4.50 MPa, the gas/liquid phase ratio range of 0.86-6.47, and the hydrate growth time of 15-120 min. It is found that the addition of TBAB not only shortens the induction time and accelerates the hydrate growth rate, but also enhances CO(2) encaged into the hydrate. However, the number of total moles of gas consumed and the number of moles of CO(2) transferred into the hydrate slurry phase decrease with the increase of the TBAB concentration when the TBAB concentration is above 0.29 mol %. The induction time reduces, and the number of moles of gas consumed, the hydrate formation rate, and the number of moles of CO(2) encaged into hydrate phase increase with the increase of the driving force. However, when the driving force is more than 2.5 MPa, H(2) prefers to go into the hydrate phase with the increase of the driving force, as compared to CO(2). In addition, the temperature has little effect on the hydrate formation process. |
Keyword | Flue-gas Co2 Technology Separation |
Subject Area | Engineering |
WOS Headings | Science & Technology ; Technology |
DOI | 10.1021/ie100851u |
WOS Subject Extended | Engineering |
URL | 查看原文 |
WOS Keyword | FLUE-GAS ; CO2 ; TECHNOLOGY ; SEPARATION |
Indexed By | SCI |
Language | 英语 |
Funding Organization | National Natural Science Foundation of China [20773133, 51076155]; Science & Technology Program of Guangdong Province [2009B050600006]; CAS [KGCX2-YW-3X6] |
WOS Subject | Engineering, Chemical |
WOS ID | WOS:000283916700056 |
Citation statistics | |
Document Type | 期刊论文 |
Identifier | http://ir.giec.ac.cn/handle/344007/8466 |
Collection | 中国科学院广州能源研究所 天然气水合物开采技术与综合利用实验室 |
Affiliation | 1.Chinese Acad Sci, Guangzhou Inst Energy Convers, Key Lab Renewable Energy & Gas Hydrate, Guangzhou 510640, Peoples R China 2.Chinese Acad Sci, Guangzhou Ctr Gas Hydrate Res, Guangzhou 510640, Peoples R China 3.Chinese Acad Sci, Grad Univ, Beijing 100083, Peoples R China |
First Author Affilication | GuangZhou Institute of Energy Conversion,Chinese Academy of Sciences |
Recommended Citation GB/T 7714 | Li, Xiao-Sen,Xia, Zhi-Ming,Chen, Zhao-Yang,et al. Gas Hydrate Formation Process for Capture of Carbon Dioxide from Fuel Gas Mixture[J]. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH,2010,49(22):11614-11619. |
APA | Li, Xiao-Sen,Xia, Zhi-Ming,Chen, Zhao-Yang,Yan, Ke-Feng,Li, Gang,&Wu, Hui-Jie.(2010).Gas Hydrate Formation Process for Capture of Carbon Dioxide from Fuel Gas Mixture.INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH,49(22),11614-11619. |
MLA | Li, Xiao-Sen,et al."Gas Hydrate Formation Process for Capture of Carbon Dioxide from Fuel Gas Mixture".INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH 49.22(2010):11614-11619. |
Files in This Item: | Download All | |||||
File Name/Size | DocType | Version | Access | License | ||
Gas Hydrate Formatio(585KB) | 开放获取 | CC BY-NC-SA | View Download |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment