GIEC OpenIR
Mechanical Booster Pump-Assisted Thermochemical Mode for Low-Grade Heat Storage and Upgrading: A Thermodynamic Study
Zeng, Tao1,2,3; Li, Jun1,2,3; Deng, Lisheng1,2,3; He, Zhaohong1,2,3; Kobayashi, Noriyuki4; Wu, Rongjun4; Huang, Hongyu1,2,3
2022-03-18
Source PublicationFRONTIERS IN ENERGY RESEARCH
ISSN2296-598X
Volume10Pages:17
Corresponding AuthorLi, Jun(lijun@ms.giec.ac.cn) ; Huang, Hongyu(huanghy@ms.giec.ac.cn)
AbstractTo assure stable and dependable functioning of the thermochemical energy storage (TCES) system under unstable low-grade heat temperatures, three mechanical booster pump-assisted TCES (MBP-assisted TCES) modes operating with SrBr2 center dot H2O/H2O, LiOH/H2O, and CaCl2 center dot H2O/H2O are proposed for the application of heat storage and upgrading. The operating modes are the MBP-assisted charging mode (A mode), MBP-assisted discharging mode (B mode), and MBP-assisted charging and discharging mode (C mode). A thermodynamic model is established to evaluate the influences of condensing temperature, compression ratio, MBP isentropic efficiency, and reaction advancement on the heat source temperature and system performance from both energy and exergy perspectives. The results indicate that compared with the other two modes, the B mode is more effective in reducing the heat source temperature and achieving better system performance. Compared to the conventional TCES mode, the proposed modes can operate at lower heat source temperatures that can be minimized by up to 21 similar to 25 degrees C by employing the B mode with a compression ratio of 3.0 at the condensing temperature of 24 degrees C. The B mode with SrBr2 center dot H2O/H2O exhibits the highest energy and exergy efficiencies that the coefficients of performance based on total energy input and electric power consumed (COPtotal and COPelec), and exergy efficiency varies in the range of 0.53 similar to 0.59, 7.4 similar to 19.6, and 0.78 similar to 0.95, respectively. In contrast, CaCl2 center dot H2O/H2O shows the lowest system performance, but a higher heat output temperature can be required. In addition, to maintain the MBP discharge temperature below 180 degrees C, there is a maximum permitted compression ratio that varies depending on the operating modes, operating conditions, and working pairs. The findings of this research can be used as theoretical references and suggestions for selecting MBP-assisted TCES modes, operating conditions, and working pairs for low-grade heat storage and upgrading.
Keywordthermochemical heat storage low-grade heat mechanical booster pump thermodynamic analysis heat upgrading
DOI10.3389/fenrg.2022.851611
WOS KeywordENERGY-STORAGE ; VAPOR COMPRESSION ; SILICA-GEL ; SYSTEM ; PERFORMANCE ; DRIVEN ; COMPOSITES ; DENSITY ; CYCLES
Indexed BySCI
Language英语
Funding ProjectKey Special Project for Introduced Talents Team of Southern Marine Science and Engineering Guangdong Laboratory (Guangzhou)[GML2019ZD0108] ; Key Research Program of Frontier Sciences, Chinese Academy of Sciences[QYZDY-SSW-JSC038] ; Key Laboratory of Renewable Energy, Chinese Academy of Sciences[E1290401] ; Science and Technology Program of Guangzhou, China[E1310404] ; Science and Technology project of China Energy Investment Corporation[GJNY-20-121]
WOS Research AreaEnergy & Fuels
Funding OrganizationKey Special Project for Introduced Talents Team of Southern Marine Science and Engineering Guangdong Laboratory (Guangzhou) ; Key Research Program of Frontier Sciences, Chinese Academy of Sciences ; Key Laboratory of Renewable Energy, Chinese Academy of Sciences ; Science and Technology Program of Guangzhou, China ; Science and Technology project of China Energy Investment Corporation
WOS SubjectEnergy & Fuels
WOS IDWOS:000779136700001
PublisherFRONTIERS MEDIA SA
Citation statistics
Cited Times:2[WOS]   [WOS Record]     [Related Records in WOS]
Document Type期刊论文
Identifierhttp://ir.giec.ac.cn/handle/344007/36183
Collection中国科学院广州能源研究所
Corresponding AuthorLi, Jun; Huang, Hongyu
Affiliation1.Chinese Acad Sci, Guangzhou Inst Energy Convers, Guangzhou, Peoples R China
2.Chinese Acad Sci, Key Lab Renewable Energy, Guangzhou, Peoples R China
3.Southern Marine Sci & Engn Guangdong Lab Guangzho, Guangzhou, Peoples R China
4.Nagoya Univ, Dept Chem Syst Engn, Nagoya, Aichi, Japan
First Author AffilicationGuangZhou Institute of Energy Conversion,Chinese Academy of Sciences
Recommended Citation
GB/T 7714
Zeng, Tao,Li, Jun,Deng, Lisheng,et al. Mechanical Booster Pump-Assisted Thermochemical Mode for Low-Grade Heat Storage and Upgrading: A Thermodynamic Study[J]. FRONTIERS IN ENERGY RESEARCH,2022,10:17.
APA Zeng, Tao.,Li, Jun.,Deng, Lisheng.,He, Zhaohong.,Kobayashi, Noriyuki.,...&Huang, Hongyu.(2022).Mechanical Booster Pump-Assisted Thermochemical Mode for Low-Grade Heat Storage and Upgrading: A Thermodynamic Study.FRONTIERS IN ENERGY RESEARCH,10,17.
MLA Zeng, Tao,et al."Mechanical Booster Pump-Assisted Thermochemical Mode for Low-Grade Heat Storage and Upgrading: A Thermodynamic Study".FRONTIERS IN ENERGY RESEARCH 10(2022):17.
Files in This Item:
There are no files associated with this item.
Related Services
Recommend this item
Bookmark
Usage statistics
Export to Endnote
Google Scholar
Similar articles in Google Scholar
[Zeng, Tao]'s Articles
[Li, Jun]'s Articles
[Deng, Lisheng]'s Articles
Baidu academic
Similar articles in Baidu academic
[Zeng, Tao]'s Articles
[Li, Jun]'s Articles
[Deng, Lisheng]'s Articles
Bing Scholar
Similar articles in Bing Scholar
[Zeng, Tao]'s Articles
[Li, Jun]'s Articles
[Deng, Lisheng]'s Articles
Terms of Use
No data!
Social Bookmark/Share
All comments (0)
No comment.
 

Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.