Knowledge Management System Of Guangzhou Institute of Energy Conversion, CAS
酸化油固定床酶法合成生物柴油研究 | |
其他题名 | Preparation of Biodiesel with Acid Oil in Fixed Bed Reactor by Immobilized Lipase |
陈英明; 常杰; 吕鹏梅; 付严; 王铁军; 陆继东; 肖波 | |
2007 | |
发表期刊 | 中山大学学报:自然科学版 |
卷号 | 46期号:B06页码:192-193 |
合作性质 | 国内 |
其他摘要 | 以固定化的假丝酵母酶为催化剂,在三段式固定床反应器内,醇油摩尔比为1:1,采用分级流加甲醇的方式,将高酸值的酸化油转化为生物柴油,探讨了酶量、溶剂量、水量、温度、反应液流速等与产物中甲酯含量的关系。正交实验结果表明,反应的最适条件为酶用量、溶剂量、水量分别为油重的15%、10%、10%,反应液流速为0.8g·min^-1,温度为45℃,在此条件下,产物中甲酯含量达到了90.18%。
The transesterification of acid oil and methanol to biodiesel catalyzed by immobilized Candida lipase in fixed bed reactors was studied. The acid oil and methanol were pumped into the reactors in three-steps which were kept the molar ratio as 1: 1. The result of orthogonality experiment indicated that: the optimal conditions for transesterification of acid oil were as following: 15% immobilized lipase, 10% hexane and 10% water of acid oil, reaction temperature 45 ℃, flow velocity of reactant 0.8 g· min ^-1 The content of fatty acid methyl ester of 90. 18% could be obtained under the optimal conditions. |
关键词 | 定化脂肪酶酸化油 生物柴油 固定床 Immobilized Lipase Acid Oil Biodiesel Fixed Bed Reactor |
学科领域 | 生物质能 |
收录类别 | 其他 |
项目资助者 | 广州市科技计划资助项目(2004J1-C0101);中国科学院知识创新工程资助项目(KGCX2-YW-306) |
文献类型 | 期刊论文 |
条目标识符 | http://ir.giec.ac.cn/handle/344007/189 |
专题 | 中国科学院广州能源研究所 生物质能源生化转化实验室 生物质化工品制备实验室 |
推荐引用方式 GB/T 7714 | 陈英明,常杰,吕鹏梅,等. 酸化油固定床酶法合成生物柴油研究[J]. 中山大学学报:自然科学版,2007,46(B06):192-193. |
APA | 陈英明.,常杰.,吕鹏梅.,付严.,王铁军.,...&肖波.(2007).酸化油固定床酶法合成生物柴油研究.中山大学学报:自然科学版,46(B06),192-193. |
MLA | 陈英明,et al."酸化油固定床酶法合成生物柴油研究".中山大学学报:自然科学版 46.B06(2007):192-193. |
条目包含的文件 | 下载所有文件 | |||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
酸化油固定床酶法合成生物柴油研究.pdf(100KB) | 开放获取 | CC BY-NC-SA | 浏览 下载 |
个性服务 |
推荐该条目 |
保存到收藏夹 |
查看访问统计 |
导出为Endnote文件 |
谷歌学术 |
谷歌学术中相似的文章 |
[陈英明]的文章 |
[常杰]的文章 |
[吕鹏梅]的文章 |
百度学术 |
百度学术中相似的文章 |
[陈英明]的文章 |
[常杰]的文章 |
[吕鹏梅]的文章 |
必应学术 |
必应学术中相似的文章 |
[陈英明]的文章 |
[常杰]的文章 |
[吕鹏梅]的文章 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论