Knowledge Management System Of Guangzhou Institute of Energy Conversion, CAS
Comparison of dry and wet milling pre-treatment methods for improving the anaerobic digestion performance of the Pennisetum hybrid | |
Dong Pengyu1,2; Li Lianhua1![]() ![]() ![]() ![]() | |
2017 | |
Source Publication | RSC ADVANCES
![]() |
Volume | 7Issue:21Pages:12610-12619 |
Abstract | Two types of milling pre-treatment methods were used to study their effects on the anaerobic digestion performance of the Pennisetum hybrid. The physical structure of the Pennisetum hybrid could be significantly damaged with both milling pre-treatment methods. With an increase in treatment time, the pore volume, surface area, average pore diameter, and the crystallization index of the Pennisetum hybrid increased gradually. The anaerobic fermentation test showed that, among the dry and wet milling pre-treatments, the highest specific methane yield was obtained at 3 h dry milling pre-treated (358.07 mL g(-1) VS) and 6 h wet milling pre-treated grass (315.87 mL g(-1)), which was 41.04% and 24.42% higher than that of the untreated Pennisetum hybrid (253.88 mL g(-1) VS). The median diameter (D50) of the Pennisetum hybrid was 25.28% and 22.36% lower than that of the untreated Pennisetum hybrid after 3 h dry and 6 h wet milling pre-treatment. After wet milling pre-treatment, the fluidity of the Pennisetum hybrid was much better than conventional "smashing" pre-treatment, which may make feeding easier in large-scale biogas projects. Good fluidity and optimization of the degree of milling pre-treatment could, therefore, be applied on an industrial scale in the future. |
Subtype | Article |
WOS Headings | Science & Technology ; Physical Sciences |
DOI | 10.1039/c6ra27822a |
WOS Subject Extended | Chemistry |
WOS Keyword | WASTE ACTIVATED-SLUDGE ; BIOGAS PRODUCTION ; METHANE PRODUCTION ; PARTICLE-SIZE ; DEGRADATION ; CELLULOSE ; IMPACT ; DISINTEGRATION ; HYDROLYSIS ; DISPERSER |
Indexed By | SCI |
Language | 英语 |
Funding Organization | Science and Technology Service Network Initiative(KFJ-Ew-STS-138) ; National Science and Technology Support Program: Key technology and engineering demonstration of lignocellulosic biomass energy conversion(2013BAD22B03) |
WOS Subject | Chemistry, Multidisciplinary |
WOS ID | WOS:000395934500022 |
Citation statistics | |
Document Type | 期刊论文 |
Identifier | http://ir.giec.ac.cn/handle/344007/14062 |
Collection | 中国科学院广州能源研究所 |
Affiliation | 1.Chinese Acad Sci, CAS Key Lab Renewable Energy, Guangzhou Inst Energy Convers, Guangzhou 510640, Guangdong, Peoples R China 2.Univ Chinese Acad Sci, Beijing 100049, Peoples R China |
Recommended Citation GB/T 7714 | Dong Pengyu,Li Lianhua,Zhen Feng,et al. Comparison of dry and wet milling pre-treatment methods for improving the anaerobic digestion performance of the Pennisetum hybrid[J]. RSC ADVANCES,2017,7(21):12610-12619. |
APA | Dong Pengyu,Li Lianhua,Zhen Feng,Kong Xiaoying,Sun Yongming,&Zhang Yi.(2017).Comparison of dry and wet milling pre-treatment methods for improving the anaerobic digestion performance of the Pennisetum hybrid.RSC ADVANCES,7(21),12610-12619. |
MLA | Dong Pengyu,et al."Comparison of dry and wet milling pre-treatment methods for improving the anaerobic digestion performance of the Pennisetum hybrid".RSC ADVANCES 7.21(2017):12610-12619. |
Files in This Item: | There are no files associated with this item. |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment