GIEC OpenIR  > 中国科学院广州能源研究所
Catalytic hydroprocessing of fatty acid methyl esters to renewable alkane fuels over Ni/HZSM-5 catalyst
Chen, Liangguang1,2; Li, Huiwen1; Fu, Junying1,2; Miao, Changlin1; Lv, Pengmei1; Yuan, Zhenhong1
2016
发表期刊CATALYSIS TODAY
卷号259页码:266-276
摘要A series of Ni/HZSM-5 catalysts with different Ni loading and Si/Al ratios were prepared by incipient wetness impregnation. The physicochemical properties of the catalysts were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), N-2-adsorption, temperature-programmed desorption of ammonia (NH3-TPD), and thermogravimetric (TG) analysis. Moreover, their catalytic performance was investigated for the hydroprocessing of long-chain unsaturated fatty acid methyl esters (FAMEs) to renewable alkane fuels using a high-pressure fixed bed reactor system with a facility for online analysis. The different Ni loading and Si/Al ratios of the catalysts, as well as the influence of reaction conditions such as temperature, pressure, H-2/oil molar ratio, and liquid hourly space velocity (LHSV), were studied in detail. The NiO aggregates dispersed on the surface of the support clearly increased the acidity after H-2 reduction, thus significantly affecting the catalytic performance. Temperature and pressure played crucial roles in the conversion of FAMEs and selectivity for gasoline or jet or diesel alkane. Hydroprocessing over 10 wt% Ni/HZSM-5 (Si/Al= 25) at 280 degrees C, a H-2 pressure of 0.8 MPa, an LHSV of 4 h(-1), and with a highly purified H2/oil molar ratio of 15 led to a high selectivity of 88.2% for C-5-C-18 liquid alkanes, which includes 8% of gasoline alkane, 32.5% of jet alkane and 47.7% of diesel alkane, along with appropriate isomerization selectivity of 27.0%, while the conversion of FAME reached 85.1%. To demonstrate the potential of this catalyst for practical applications, its stability in the hydroprocessing of FAMEs was also investigated. The conversion of FAMEs decreased to 30.1% over 10 wt% Ni/HZSM-5 (Si/Al= 25) after operation for 80 h. Catalyst deactivation was predominantly caused by the deposition of carbon which causes blockage of the pores for FAMEs as evidence from TG analysis. (C) 2015 Elsevier B.V. All rights reserved.
文章类型Article
关键词Hydroprocessing Fames Alkane Fuels Ni/hzsm-5
WOS标题词Science & Technology ; Physical Sciences ; Technology
DOI10.1016/j.cattod.2015.08.023
研究领域[WOS]Chemistry ; Engineering
关键词[WOS]PALM OIL ; HYDROCARBON FUELS ; VEGETABLE-OILS ; STEARIC-ACID ; DEOXYGENATION ; DIESEL ; HYDRODEOXYGENATION ; NI ; HYDROTREATMENT ; BIODIESEL
收录类别SCI
语种英语
WOS类目Chemistry, Applied ; Chemistry, Physical ; Engineering, Chemical
WOS记录号WOS:000364863000004
引用统计
被引频次:82[WOS]   [WOS记录]     [WOS相关记录]
文献类型期刊论文
条目标识符http://ir.giec.ac.cn/handle/344007/10910
专题中国科学院广州能源研究所
作者单位1.Chinese Acad Sci, Guangzhou Inst Energy Convers, Key Lab Renewable Energy, Guangzhou 510640, Peoples R China
2.Univ Chinese Acad Sci, Beijing 100049, Peoples R China
第一作者单位中国科学院广州能源研究所
推荐引用方式
GB/T 7714
Chen, Liangguang,Li, Huiwen,Fu, Junying,et al. Catalytic hydroprocessing of fatty acid methyl esters to renewable alkane fuels over Ni/HZSM-5 catalyst[J]. CATALYSIS TODAY,2016,259:266-276.
APA Chen, Liangguang,Li, Huiwen,Fu, Junying,Miao, Changlin,Lv, Pengmei,&Yuan, Zhenhong.(2016).Catalytic hydroprocessing of fatty acid methyl esters to renewable alkane fuels over Ni/HZSM-5 catalyst.CATALYSIS TODAY,259,266-276.
MLA Chen, Liangguang,et al."Catalytic hydroprocessing of fatty acid methyl esters to renewable alkane fuels over Ni/HZSM-5 catalyst".CATALYSIS TODAY 259(2016):266-276.
条目包含的文件
条目无相关文件。
个性服务
推荐该条目
保存到收藏夹
查看访问统计
导出为Endnote文件
谷歌学术
谷歌学术中相似的文章
[Chen, Liangguang]的文章
[Li, Huiwen]的文章
[Fu, Junying]的文章
百度学术
百度学术中相似的文章
[Chen, Liangguang]的文章
[Li, Huiwen]的文章
[Fu, Junying]的文章
必应学术
必应学术中相似的文章
[Chen, Liangguang]的文章
[Li, Huiwen]的文章
[Fu, Junying]的文章
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。